-
DB6109-T 305-2024 白魔芋栽培技术规程 安康市.pdf
-
DB6109-T 304-2024 富硒魔芋栽培技术规程 安康市.pdf
-
DB61-T 1829-2024 地理标志商标质量要求 杨陵葡萄 陕西省.pdf
-
DB61-T 1828-2024 林业碳汇计量监测技术规程 陕西省.pdf
-
DB61-T 1827-2024 华中五味子病虫害综合防控技术规范 陕西省.pdf
-
DB61-T 1826-2024 花椒嫁接苗木生产技术规范 陕西省.pdf
-
DB61-T 1825-2024 煤矸石山植被恢复技术规范 陕西省.pdf
-
DB61-T 1824.3-2024 白于山区集雨造林技术规范第3部分 造林 陕西省.pdf
-
DB61-T 1824.2-2024 白于山区集雨造林技术规范 第2部分 整地 陕西省.pdf
-
DB61-T 1824.1-2024 白于山区集雨造林技术规范第1部分 总体要求 陕西省.pdf
-
DB61-T 1823-2024 樱桃贮运技术规范 陕西省.pdf
-
DB61-T 1822-2024 母猪三周批次生产技术规范 陕西省.pdf
-
DB61-T 1821-2024 苹果褐斑病测报技术规范 陕西省.pdf
-
DB61-T 1820-2024 苹果树腐烂病测报技术规范 陕西省.pdf
-
DB61-T 1521.13-2024 奶山羊养殖技术规范第13部分:泌乳性能测定 陕西省.pdf
-
DB61-T 1819-2024 大棚四膜覆盖西瓜栽培技术规范 陕西省.pdf
-
DB61-T 1617.6-2024 矮化苹果自根砧栽培技术规程 第6部分:疏花疏果花 陕西省.pdf
-
DB61-T 1818-2024 桑蚕丝制造技术规程 陕西省.pdf
-
DB61-T 1817-2024 桑蚕茧干燥技术规程 陕西省.pdf
-
DB61-T 1816-2024 牙齿美白功效测试技术规范 陕西省.pdf
-
DB61-T 1815-2024 化妆品修护功效测试技术规范 陕西省.pdf
-
DB61-T 1814-2024 化妆品抗皱功效测试技术规范 陕西省.pdf
-
DB61-T 1813-2024 化妆品紧致功效测试技术规范 陕西省.pdf
-
DB61-T 1811-2024 地质灾害防治规划编制指南 陕西省.pdf
-
DB61-T 1810-2024 煤制甲醇行业 清洁生产评价指标体系 陕西省.pdf
-
DB61-T 1809-2024 数据价值评估指南 陕西省.pdf
-
DB61-T 1808-2024 中深层地热能井下换热开发利用术语 陕西省.pdf
-
DB61-T 1807-2024 起重机械生产单位质量管理规范 陕西省.pdf
-
DB61-T 1806.3-2024 网售产品质量监督抽查工作规范 第3部分:样品管理 陕西省.pdf
-
DB61-T 1806.2-2024 网售产品质量监督抽查工作规范 第2部分:抽样要求 陕西省.pdf
-
DB61-T 1806.1-2024 网售产品质量监督抽查工作规范 第1部分:总体要求 陕西省.pdf
-
DB61-T 1805-2024 部门联合“双随机、一公开”监管工作规范 陕西省.pdf
-
DB 6505-T 194—2024 葡萄水肥一体化栽培技术规程 哈密市.pdf
-
DB 6505-T 193—2024 葡萄病虫害绿色防控技术规程 哈密市.pdf
-
DB 6505-T 192—2024 杏树露地栽培管理技术规程 哈密市.pdf
-
DB 6505-T 191—2024 农田防护林抚育管护技术规程 哈密市.pdf
-
DB 6505-T 190—2024 气象服务地理分区 哈密市.pdf
-
DB 6505-T 189—2024 专业纤维检验机构留样管理规范 哈密市.pdf
-
DB 6505-T 188—2024 花生病虫害绿色防控技术规程 哈密市.pdf
-
DB 6505-T 187—2024 乳用双峰驼养殖标准体系建设指南 哈密市.pdf
-
DB 6505-T 186—2024 双峰种公驼保健技术规程 哈密市.pdf
-
DB 6505-T 185—2024 公驼去势技术操作规程 哈密市.pdf
-
DB 6505-T 184—2024 南美白对虾淡水养殖技术规程 哈密市.pdf
-
DB 6505-T 183—2024 架子牛缓解运输应激技术规程 哈密市.pdf
-
GB T 40681.2-2023 生产过程能力和性能监测统计方法 第 2 部分:时间相依过程模型的过程能力与性能.详细解读.pdf
-
GB T XXXX.2-20XX 生产过程能力和性能监测统计方法 第 2 部分:时间相依过程模型的过程能力与性能.pdf
-
IEC 60601-2-52 2009 Medical electrical equipment — Part 2-52 Particular requirements for the basic safety and essential performance of medical beds.pdf
-
IEC 80000-13 2008 Quantities and units — Part 13 Information science and technology.pdf
-
IEC 80416-1 2008 Basic principles for graphical symbols for use on equipment — Part 1 Creation of graphical symbols for registration.pdf
-
IEC TR 80002-1 2009 Medical device software — Part 1 Guidance on the application o.pdf
-
ISO IEC TR 24729-4 2009 Information technology — Radio frequency identification for item management — Implementation guidelines — Part 4 Tag data security.pdf
-
ISO 1003 2008 Spices — Ginger (Zingiber officinale Roscoe) — Specification.pdf
-
ISO 10058-1 2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 1 Apparatus, reagents,.pdf
-
ISO 10058-2 2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 2 Wet chemical analysis.pdf
-
ISO 10058-3 2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 3 Flame atomic absorption spectrophotometry.pdf
-
ISO 10069-1 2008 Tools for pressing — Elastomer pressure springs — Part 1 General specification.pdf
-
ISO 10069-2 2008 Tools for pressing — Elastomer pressure springs — Part 2 Specification of accessories.pdf
-
ISO 10071-1 2008 Tools for pressing — Ball-lock punches — Part 1 Ball-lock punches for light.pdf
-
ISO 10073 2008 Tools for moulding — Support pillars.pdf
-
ISO 10130 2009 Cosmetics — Analytical methods — Nitrosamines Detection and determination of N-nitrosodiethanolamine (NDELA) in co.pdf
-
ISO 10130 2009 Cosmetics — Analytical methods — Nitrosamines Detection and determination of N-nitrosodiethanolamine (NDELA) in.pdf
-
ISO 10190 2008 Motorcycle chains — Characteristics and test methods.pdf
-
ISO 10242-2 2008 Tools for pressing — Punch holder shanks — Part 2 Type C.pdf
-
ISO 10242-3 2008 Tools for pressing — Punch holder shanks — Part 3 Type D.pdf
-
ISO 10263-1 2009 Earth-moving machinery — Operator enclosure environment — Part 1 Terms and definitions.pdf
-
ISO 10263-2 2009 Earth-moving machinery — Operator enclosure environment — Part 2 Air filter element test method.pdf
-
ISO 10263-3 2009 Earth-moving machinery — Operator enclosure environment — Part 3 Pressurization test method.pdf
-
ISO 10263-4 2009 Earth-moving machinery — Operator enclosure environment — Part 4 Heating, ventilating and air conditioning (HVAC) test method and performance.pdf
-
ISO 10263-5 2009 Earth-moving machinery — Operator enclosure environment — Part 5 Windscreen defrosting system test method.pdf
-
ISO 10263-6 2009 Earth-moving machinery — Operator enclosure environment — Part 6 Determination of effect of solar heating.pdf
-
ISO 10295-2 2009 Fire tests for building elements and components — Fire testing of service installations — Part 2 Linear joint (gap) seals.pdf
-
ISO 10307-1 2009 Petroleum products — Total sediment in residual fuel oils — Part 1 Determination by hot filtration.pdf
-
ISO 10307-2 2009 Petroleum products — Total sediment in residual fuel oils — Part 2 Determination using standard procedures for ageing.pdf
-
ISO 10317 2008 Rolling bearings — Tapered roller bearings — Designation system.pdf
-
ISO 10321 2008 Geosynthetics — Tensile test for joints seams by wide-width strip method.pdf
-
ISO 10426-1 2009 Petroleum and natural gas industries — Cements and materials for well cementing — Part 1 Specification.pdf
-
ISO 105-B07 2009 Textiles — Tests for colour fastness — Part B07 Colour fastness to light of.pdf
-
ISO 105-E07 2010 Textiles — Tests for colour fastness — Part E07 Colour fastness to spot.pdf
-
ISO 105-F09 2009 Textiles — Tests for colour fastness — Part F09 Specification for cotton rubbing cloth.pdf
-
ISO 105-J03 2009 Textiles — Tests for colour fastness — Part J03 Calculation of colour differences.pdf
-
ISO 10505 2009 Photography — Root mean square granularity of photographic films — Method of measurement.pdf
-
ISO 10523 2008 Water quality — Determination of pH.pdf
-
ISO 10524-4 2008 Pressure regulators for use with medical gases — Part 4 Low-pressure regulators.pdf
-
ISO 10545-16 2010 Ceramic tiles — Part 16 Determination of small colour differences.pdf
-
ISO 10545-6 2010 Ceramic tiles — Part 6 Determination of resistance to deep abrasion for unglazed tiles.pdf
-
ISO 10547 2009 Polyester fibre ropes — Double braid construction.pdf
-
ISO 10554 2009 Polyamide fibre ropes — Double braid construction.pdf
-
ISO 10556 2009 Fibre ropes of polyester polyolefin dual fibres.pdf
-
ISO 10572 2009 Mixed polyolefin fibre ropes.pdf
-
ISO 10580 2010 Resilient, textile and laminate floor coverings — Test method for volatile organic compound (VOC) emissions.pdf
-
ISO 10596 2009 Ships and marine technology — Marine wind vane and anemometers.pdf
-
ISO 10816-7 2009 Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 7 Rotodynamic pumps for industrial applications, including measurements on rotating shafts.pdf
-
ISO 10840 2008 Plastics — Guidance for the use of standard fire tests.pdf
-
ISO 10846-1 2008 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1 Principles and guidelines.pdf
-
ISO 10846-2 2008 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2 Direct method for determination of the dynamic stiffness of resilie.pdf
-
ISO 10846-5 2008 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5 Driving point method for determination of the low-frequen.pdf
-
ISO 10862 2009 Small craft — Quick release system for trapeze harness.pdf
-
ISO 10874 2009 Resilient, textile and laminate floor coverings — Classification.pdf
-
ISO 10907-1 2008 Tools for moulding — Locating rings — Part 1 Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B).pdf
-
ISO 10935 2009 Microscopes — Interfacing connection type C.pdf
-
ISO 10940 2009 Ophthalmic instruments — Fundus cameras.pdf
-
ISO 10944 2009 Ophthalmic instruments — Synoptophores.pdf
-
ISO 10972-2 2009 Cranes — Requirements for mechanisms — Part 2 Mobile cranes.pdf
-
ISO 10984-2 2009 Timber structures — Dowel-type fasteners — Part 2 Determination of embedding strength.pdf
-
ISO 10993-5 2009 Biological evaluation of medical devices — Part 5 Tests for in vitro cytotoxicit.pdf
-
ISO 10998 2008 Agricultural tractors — Requirements for steering.pdf
-
ISO 11014 2009 Safety data sheet for chemical products — Content and order of sections.pdf
-
ISO 11053 2009 Vegetable fats and oils — Determination of cocoa butter equivalents in milk chocolate.pdf
-
ISO 11064-5 2008 Ergonomic design of control centres — Part 5 Displays and controls.pdf
-
ISO 1112 2009 Horology — Functional and non-functional jewels.pdf
-
ISO 11143 2008 Dentistry — Amalgam separators.pdf
-
ISO 11155-2 2009 Road vehicles — Air filters for passenger compartments — Part 2 Test for gaseous filtration.pdf
-
ISO 11201 2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over.pdf
-
ISO 11414 2009 Plastics pipes and fittings — Preparation of polyethylene (PE) pipe pipe or pipe fitting test piece assemblies by butt fusion.pdf
-
ISO 11533 2009 Iron ores — Determination of cobalt — Flame atomic absorption spectrometric method.pdf
-
ISO 11545 2009 Agricultural irrigation equipment — Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles — Determination of uniformity of water distribution.pdf
-
ISO 11639 2010 Aerospace — Part numbering for hose assemblies.pdf
-
ISO 11699-1 2008 Non-destructive testing — Industrial radiographic film — Part 1 Classification of film systems for industrial radiography.pdf
-
ISO 11701 2009 Vegetable fats and oils — Determination of phospholipids content in lecithins by HPLC using a light-scattering detector.pdf
-
ISO 11843-5 2008 Capability of detection — Part 5 Methodology in the linear and non-linear calibration cases.pdf
-
ISO 11865 2009 Instant whole milk powder — Determination of white flecks number.pdf
-
ISO 11903 2008 Tools for pressing — Guide pillar mountings.pdf
-
ISO 11979-4 2008 Ophthalmic implants — Intraocular lenses — Part 4 Labelling and information.pdf
-
ISO 12080-1 2009 Dried skimmed milk — Determination of vitamin A content — Part 1 Colorimetric method.pdf
-
ISO 12151-6 2009 Connections for hydraulic fluid power and general use — Hose fittings — Part 6 Hose fittings with ISO 8434-6 60 degree cone ends.pdf
-
ISO 1217 2009 Displacement compressors — Acceptance tests.pdf
-
ISO 12176-2 2008 Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2 Electrofusion.pdf
-
ISO 12188-1 2010 Tractors and machinery for agriculture and forestry — Test procedures for positioning and guidance systems in agriculture — Part 1 Dynamic testing of satellite-based positioning devices.pdf
-
ISO 12189 2008 Implants for surgery — Mechanical testing of implantable spinal devices — Fatigue test method for spinal implant assemblies using an anterior support.pdf
-
ISO 12215-6 2008 Small craft — Hull construction and scantlings — Part 6 Structural arrangements and details.pdf
-
ISO 12215-8 2009 Small craft — Hull construction and scantlings — Part 8 Rudders.pdf
-
ISO 12257 2008 Aerospace — Internal six-lobe drives — Metric series.pdf
-
ISO 12439 2010 Mixing water for concrete.pdf
-
ISO 12500-3 2009 Filters for compressed air — Test methods — Part 3 Particulates.pdf
-
ISO 12500-4 2009 Filters for compressed air — Methods of test — Part 4 Water.pdf
-
ISO 12576-2 2008 Thermal insulation products — Conformity control systems — Part 2 In-situ products.pdf
-
ISO 12637-2 2008 Graphic technology — Vocabulary — Part 2 Prepress terms.pdf
-
ISO 12637-3 2009 Graphic technology — Vocabulary — Part 3 Printing terms.pdf
-
ISO 12637-4 2008 Graphic technology — Vocabulary — Part 4 Postpress terms.pdf
-
ISO 12776 2008 Pallets — Slip sheets.pdf
-
ISO 12789-1 2008 Reference radiation fields — Simulated workplace neutron fields — Part 1 Characteristics and methods of production.pdf
-
ISO 12789-2 2008 Reference radiation fields — Simulated workplace neutron fields — Part 2 Calibration fundamentals related to the basic quantities.pdf
-
ISO 12819 2009 Methods of evaluation of the battery life of a battery-powered watch.pdf
-
ISO 12873 2010 Olive oils and olive-pomace oils — Determination of wax content by capillary gas chromatography.pdf
-
ISO 13041-6 2009 Test conditions for numerically controlled turning machines and turning centres — Part 6 Accuracy of a finished test piece.pdf
-
ISO 13351 2009 Fans — Dimensions.pdf
-
ISO 13472-2 2010 Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 2 Spot method for reflective surfaces.pdf
-
ISO 13473-5 2009 Characterization of pavement texture by use of surface profiles — Part 5 Determination of megatexture.pdf
-
ISO 13500 2008 Petroleum and natural gas industries — Drilling fluid materials — Specifications and tests.pdf
-
ISO 13726 2008 Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions.pdf
-
ISO 13823 2008 General principles on the design of structures for durability.pdf
-
ISO 13855 2010 Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body.pdf
-
ISO 13906 2008 Animal feeding stuffs — Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents.pdf
-
ISO 13967 2009 Thermoplastics fittings — Determination of ring stiffness.pdf
-
ISO 14310 2008 Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs.pdf
-
ISO 14344 2010 Welding consumables — Procurement of filler materials and fluxes.pdf
-
ISO 14347 2008 Fatigue — Design procedure for welded hollow-section joints — Recommendations.pdf
-
ISO 14401-1 2009 Earth-moving machinery — Field of vision of surveillance and rear-view mirrors — Part 1 Test methods.pdf
-
ISO 14401-2 2009 Earth-moving machinery — Field of vision of surveillance and rear-view mirrors — Part 2 Performance criteria.pdf
-
ISO 14419 2010 Textiles — Oil repellency — Hydrocarbon resistance test.pdf
-
ISO 14436 2010 Pulps — Standard tap water for drainability measurements — Conductivity 40 mS m to 150 mS m.pdf
-
ISO 14509-3 2009 Small craft — Airborne sound emitted by powered recreational craft — Part 3 Sound assessment using calculation and measurement procedures.pdf
-
ISO 14524 2009 Photography — Electronic still-picture cameras — Methods for measuring opto-electronic conversion functions (OECFs).pdf
-
ISO 1456 2009 Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium.pdf
-
ISO 14602 2010 Non-active surgical implants — Implants for osteosynthesis — Particular requirements.pdf
-
ISO 14703 2008 Fine ceramics (advanced ceramics, advanced technical ceramics) — Sample preparation for the determination of particle size distribution of ceramic powders.pdf
-
ISO 14717 2008 Oil of origanum, Spanish type [Coridothymus capitatus (L.) Rchb.f.].pdf
-
ISO 14723 2009 Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves.pdf
-
ISO 14726 2008 Ships and marine technology — Identification colours for the content of piping systems.pdf
-
ISO 14744-1 2008 Welding — Acceptance inspection of electron beam welding machines — Part 1 Principles and acceptance conditions.pdf
-
ISO 14798 2009 Lifts (elevators), escalators and moving walks — Risk assessment and reduction methodology.pdf
-
ISO 14896 2009 Plastics — Polyurethane raw materials — Determination of isocyanate content.pdf
-
ISO 1501 2009 ISO miniature screw threads.pdf
-
ISO 1503 2008 Spatial orientation and direction of movement — Ergonomic requirements.pdf
-
ISO 1513 2010 Paints and varnishes — Examination and preparation of test samples.pdf
-
ISO 15206 2010 Timber poles — Basic requirements and test methods.pdf
-
ISO 15223-2 2010 Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2 Symbol development, selection and validation.pdf
-
ISO 15270 2008 Plastics — Guidelines for the recovery and recycling of plastics waste.pdf
-
ISO 15337 2009 Ambient air — Gas phase titration — Calibration of analysers for ozone.pdf
-
ISO 15472 2010 Surface chemical analysis — X-ray photoelectron spectrometers — Calibration of energy scales.pdf
-
ISO 15484 2008 Road vehicles — Brake lining friction materials — Product definition and q.pdf
-
ISO 15519-1 2010 Specification for diagrams for process industry — Part 1 General rules.pdf
-
ISO 15686-8 2008 Buildings and constructed assets — Service-life planning — Part 8 Reference service life and service-life estimation.pdf
-
ISO 15743 2008 Ergonomics of the thermal environment — Cold workplaces — Risk assessment and management.pdf
-
ISO 15754 2009 Paper and board — Determination of z-directional tensile strength.pdf
-
ISO 15767 2009 Workplace atmospheres — Controlling and characterizing uncertainty in weighing collected aerosols.pdf
-
ISO 15784-1 2008 Intelligent transport systems (ITS) — Data exchange involving roadside modules communication — Part 1 General principles and documentation framework of application profiles.pdf
-
ISO 15786 2008 Technical drawings — Simplified representation and dimensioning of holes.pdf
-
ISO 15877-1 2009 Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1 General.pdf
-
ISO 15877-3 2009 Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3 Fittings.pdf
-
ISO 15927-2 2009 Hygrothermal performance of buildings — Calculation and presentation of climatic data — Part 2 Hourly data for design cooling load.pdf
-
ISO 15927-3 2009 Hygrothermal performance of buildings - Calculation and presentation of climatic data — Part 3 Calculation of a driving rain index for vertical surfaces from hourly wind and rain data.pdf
-
ISO 15971 2008 Natural gas — Measurement of properties — Calorific value and Wobbe ind.pdf
-
ISO 16000-13 2008 Indoor air — Part 13 Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo.pdf
-
ISO 16000-14 2009 Indoor air — Part 14 Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins dibenzofurans.pdf
-
ISO 16000-15 2008 Indoor air — Part 15 Sampling strategy for nitrogen dioxide (NO2).pdf
-
ISO 16000-16 2008 Indoor air — Part 16 Detection and enumeration of moulds — Sampling by.pdf
-
ISO 16000-17 2008 Indoor air — Part 17 Detection and enumeration of moulds — Culture-based method.pdf
-
ISO 16100-1 2009 Industrial automation systems and integration — Manufacturing software capability profiling for interoperability — Part 1 Framework.pdf
-
ISO 16110-2 2010 Hydrogen generators using fuel processing technologies — Part 2 Test methods for performance.pdf
站内资源均来自网友分享或网络收集整理,若无意中侵犯到您的权利,敬请联系我们
微信(点击查看客服),我们将及时删除相关资源。